I have been using this soldering station very often for soldering through hole and surface mount components including components in size 1206, 0805, 0603 and SOIC ICs. It is easy to set an accurate temperature on this iron - this is very important when soldering temperature sensitive components. The WESD51 digital soldering station has been designed for industrial manufacturing, but it can also be used for variety other soldering projects,including repair of circuit boards, replacement of electronic components or some soldering projects for hobbyist.
The station comes with a power unit, detachable 50W iron (PES51), iron holder and tip-cleaning sponge, and 3-wire power cord. There is a power on/off switch, power-on LED, and temperature adjusting knob on the power unit. The station has processor control and digital display. The WESD51 Weller soldering station is the digital readout version of the popular analog WES51 soldering station. The unit display shows a "Read" mode by default, which displays the current temperature of the tip. To switch into the "Set" mode, turn the temperature control knob slightly and the display will show the current "Set" temperature. In other words, while adjusting the temperature, the display shows your target temperature and then automatically switches to show the current tip temperature. Tip temperature is adjustable in the range of 350 ºF to 850 ºF (177 ºC to 454 ºC), temperature accuracy is: +/-10 °F (+/- 6° C). The temperature shown on display can be switched between Degrees "F" and Degrees "C"- the factory default is ºF. The unit's grounded soldering iron tip, a digital readout, zero power switching and anti-static design allow the WESD51 soldering iron to meet high quality standards including CE mark. This soldering station will automatically shut off power to the tool and digital display after 99 minutes of inactivity.
The WESD51 Weller iron comes with a PES51 soldering pencil. The PES51 is a slim, comfortable pencil style soldering iron that features a Nichrome wound stainless steel element construction, a non-burning silicone rubber cord, and large selection of tips in various styles including tips for surface mount devices. The iron uses ET series soldering tips, and changing the tips is quick and easy. The assortment of tips is very extensive - there are tips for heavy duty work to fine tips for SMD including conical, long conical, single flat, screwdriver and narrow screwdriver soldering tips.
The WESD51 Weller soldering station is "one of a kind" and I strongly recommend it. It is a real pleasure to work with WESD51 soldering iron. Absolutely worth the money! I give 5 out of 5 stars to this soldering iron.
No comments:
Post a Comment